DO’S | DONT’S | PRODUCT IMEGES |
Use 2T oil @20 ml per litre of petrol for P-2 ULV  @30 ML per litres for STIHL SR-420, 450, 5600. | Please do not run machine without adding 2T oil in petrol as recommended dose. | UPL CLARKE P2 ULV             SR 420, 450 5600 |
Clean nozzle filter if chemical is not coming out. | Mix petrol & 2T oil, shake properly in a bottle then fill it in the machine before starting. | |
After every usage & on daily basis the units should be washed with clean water & nebulised for 2-3 minutes with clean water. | Please do not open nozzle filter frequently. | |
Check loose parts and nuts & bolts daily, it should be closed tightly.  | Please do not run choke continuously. Please ensure that choke is off after the engine start. | |
Clean air filter every 20 hours of running. | Please do not fill chemical & fuel above the maximum level. | |
Clean spark plug  every 100 hours of running. | Please do not fill chemical & water without the tank filter. | |
Clean the silencer net after every 50 hours of usage. | Do not use DDVP, WP, Or any Alcoholic disinfectant in machine. | |
Please use normal tooth brush to clean each filter. | Do not use any type of Sodium & Chlorine based disinfectant in the machine. | |
Read instruction manual line by line carefully before start & run the machine. | Please do not run engine without chemical & chemical mixture. | |
Give your technician proper training who has to start & run the machine. | Please do not use dirty water in the machine. | |
Machine should be used one handedly. | Do not throw water in engine & carburettor area. |
DO’S | DONT’S | PRODUCT IMEGES |
Please use Indian 3 or 2 Pin Adopter ( for UPL Clarke) | Don’t run the machine continuously, Run 5-10 minutes after that give rest for 2-3 minutes after each running cycle of 5-10 minutes, also do not run machine in high speed for more than 2-3 minutes, medium speed is recommended.    |
Atomer-II      Rockstone 12 & 16 ltr backpack   Rockstone UF 4.5 ltr UPL CLARKE ULV Rockstone UVLS 8000 Rockstone SF130/SF131 |
Check the power cable daily before plugging | Don’t fill the water when the machine plugged in. | |
Please use more than 20 meter extension cable in 2 core & 2.5- 3.00 sq. Mm thickness to all ULV | Don’t fill the water more than the capacity of tank, also fill clean water , during filling the Electric motor shouldn’t contact with the water. | |
If machine is not working check the 10amp fuse( for UPL & Other) | Do not fill water without funnel; don’t keep using the machine with dusty air filter. | |
Clean air filter at every 20 hours of running. | Please do not fill chemical above  maximum level. | |
Check the air filter  every 3 days & clean it smoothly with soft cloths, you can dip in tarpin oil to clean it properly . | Please do not use dirty water in the machine. Please do not fill chemicals & water without tank filter. | |
You can clean the tank filter if the fog is not coming properly, also clean with pressure pump with toothbrush to clean with normal water at least weekly. | Do not use DDVP, WP or any Alcoholic disinfectant in machine. Always use the US EPA approved disinfectant or equivalent grade in ULV machine. | |
After every usages & daily basis the unit should be washed & nebulised for 2-3 min with clean water. | Do not use any type of Sodium & Chlorine based disinfectant in the machine. Any disinfectant which will damage rubber & PP parts of the machine is strictly prohibited.  | |
Read instruction manual line by line carefully before start & run the machine. | Please do not run engine without chemical & chemical mixture | |
Give your technician proper training who is to start & run the machine . | Any flammable disinfectant should be avoided, it will be damage the ULV parts . | |
Machine should be used single handily. | Do not run the machine in rainy areas. It is not a water resistant product. This is electric powered product. |